Welcome to EPOBOND Factory & industry


Epobond Epoxy Clear is a fast transparent, versatile with high adhesive strength. It provides a strong and permanent bond to metal, wood, rubber, most plastics, crystal, fiberglass, porcelain, ceramic, marble, stone, concrete, paper, cork and textiles. In addition to this it is also suitable for fixing PVC, methyl acrylate, PU- polystyrene, synthetic- polycarbonate and polyamide materials. It is not suitable for polyethylene, polypropylene and Teflon. Epobond Epoxy Clear is not only for fixing but also for filling holes and for repairing.


  • Surface must be clean dry and free of oil, grease and rust. To obtain better results surfaces should be sanded before application..
  • Mix thoroughly equal quantities from the two tubes for 30-60 seconds. Mix only what can be used in 4 minutes time..
  • Apply mixture on surfaces to be repaired, when bonding two surfaces only slight pressure is required while product sets. Final cure Takes 1 hour. Epobond Epoxy Clear has excellent resistance to gas, oil, and water. detergents and most chemicals